manualshive.com logo in svg

NETGEAR ProSafe Quad WAN FR538G, Справочное руководство, Страница: 21 / 194

Поделиться
Скачать
NETGEAR ProSafe Quad WAN FR538G Скачать руководство пользователя страница 21

ProSafe Quad WAN Gigabit Firewall FR538G Reference Manual

Introduction

1-5

v1.0, November 2007

•

Free technical support seven days a week, 24 hours a day, according to the terms identified in 
the Warranty and Support information card provided with your product.

Package Contents

The product package should contain the following items:

•

ProSafe Quad WAN Gigabit Firewall.

•

AC power cable.

•

19-inch rack mounting hardware and rubber feet.

•

Category 5 (Cat5) Ethernet cable.

•

Installation Guide, FR538G ProSafe Quad WAN Gigabit Firewall

•

Resource CD

, including:

–

Reference Manual 

•

Warranty and Support Information Card.

If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the 
carton, including the original packing materials, in case you need to return the firewall for repair.

Router Front Panel

The ProSafe Quad WAN Gigabit Firewall front panel shown below contains the port connections, 
status LEDs, and the factory defaults reset button. 

Table 1-1

 describes each item on the front panel and its operation. 

Figure 1-1

1

2

3

4

5

6

Содержание ProSafe Quad WAN FR538G



































































































































































































Отзывы:

Нет отзывов