NETGEAR ProSafe GSM7324, Справочное руководство, Страница: 155 / 263

7000 Series L3 Managed Switch Reference Manual for Software v1.0
Routing Commands 8-27
May 30, 2003 Beta Draft
show router route table
This command causes the entire route table to be displayed. This commands takes no options.
Format
show router route table
Network Address
Is an IP address identifying the network on the specified inter-
face.
Subnet Mask
Is a mask of the network and host portion of the IP address for the
router interface.
Protocol
Tells which protocol added the specified route. The possibilities
are: local, static, OSPF or RIP.
Next Hop Intf
The outgoing router interface to use when forwarding traffic to
the next destination.
Next Hop IP Address
The outgoing router IP address to use when forwarding traffic to
the next router (if any) in the path toward the destination.
Total Number of Routes
The total number of routes.
show router route bestroutes
This command causes the entire route table to be displayed. This commands takes no options.
Format
show router route bestroutes
Network Address
Is an IP address identifying the network on the specified inter-
face.
Subnet Mask
Is a mask of the network and host portion of the IP address for the
specified interface.
Protocol
Tells which protocol added the specified route. The possibilities
are: local, static, OSPF or RIP.
Next Hop Intf
The outgoing router interface to use when forwarding traffic to
the next destination.
Next Hop IP Address
The outgoing router IP address to use when forwarding traffic to
the next router (if any) in the path toward the destination.
Total Number of Routes
The total number of routes.
show router route entry
This command displays detailed information about the route to a specific network to be displayed.
The value for <networkaddr> is a valid IP address.