NETGEAR ProSafe GSM7324, Справочное руководство, Страница: 125 / 263

7000 Series L3 Managed Switch Reference Manual for Software v1.0
Switching Commands 7-67
May 30, 2003 Beta Draft
Append the file path to the file name if the string is less than 31 characters. Otherwise, use the
transfer download path command, and the File Name will be appended to the File Path as is.
Note: This command is valid only when the Transfer Mode is TFTP. See “transfer download
mode” on page 66.
Default
Blank
Format
transfer download filename <name>
transfer download datatype
This command sets the type of file to download to the switch.
Default
code
Format
transfer download datatype <code|config>
transfer download start
This command starts a download transfer after displaying current settings and upon confirmation.
Format
transfer download start
clear transfer
This command resets the file transfer configured values to the factory defaults.
Format
clear transfer
clear config
This command resets the configuration to the factory defaults without powering off the switch.
The switch is automatically reset when this command is processed. You are prompted to confirm
that the reset should proceed.
Format
clear config
clear pass
This command resets all user passwords to the factory defaults without powering off the switch.
You are prompted to confirm that the password reset should proceed.
Format
clear pass