NETGEAR ProSAFE GS105Ev2 Скачать руководство пользователя страница 70

Страница: 70 / 83

Manage and Monitor the Switch

ProSAFE Gigabit Web Managed (Plus) Switches

Use the ProSAFE Plus Utility to Restore a Saved Switch
Configuration



To restore the switch configuration that you saved:

Connect your computer to the same network as the switch.

You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.

Double-click the

ProSAFE Plus Utility

icon.

The Switch Selection page displays a list of Web Managed (Plus) switches that it
discovers on the local network.

Select the switch.

If you do not see the switch, click the

REFRESH

button.

Click the

APPLY

button.

You are asked to enter the password for the switch.

Enter the switch’s password in the

password

field.

The switch’s default password is

password

The Switch Status page displays.

Select

System > Maintenance > Restore Configuration

The Restore Configuration page displays.

Click the

BROWSE

button.

Find and select the configuration file (a

.cfg

file).

Click the

APPLY

button.

The saved configuration is restored to the switch. The switch reboots to load the restored
configuration.

Restore Factory Default Settings

You can return the switch to its factory settings.

Use Browser-Based Access to Restore Factory Settings



To restore factory settings:

Connect your computer to the same network as the switch.

You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.

Launch a web browser.

In the address field of your web browser, enter the IP address of the switch.

Содержание ProSAFE GS105Ev2




















































































Результаты поиска

Содержание ProSAFE GS105Ev2

Отзывы:

Похожие инструкции для ProSAFE GS105Ev2

Бренды по названию

Популярные бренды

NETGEAR ProSAFE GS105Ev2, Руководство пользователя

Результаты поиска

Содержание ProSAFE GS105Ev2

Отзывы:

Похожие инструкции для ProSAFE GS105Ev2

Бренды по названию

Популярные бренды