Table 1. LED and button descriptions (Continued)
Descriptions
LEDs and Buttons
The LED color indicates the speed: white for Gigabit Ethernet connections and amber for
100 Mbps or 10 Mbps Ethernet connections.
Solid white or solid amber. A powered-on device is connected to the Ethernet port.
Blinking white or blinking amber. The port is sending or receiving traffic.
Off. No device is connected to this Ethernet port.
LAN ports 1–4
Pressing this button for two seconds turns the 2.4 GHz and 5 GHz WiFi radios on and off.
If this LED is solid white, the WiFi radios are on. If this LED is off, the WiFi radios are turned
off and you cannot use WiFi to connect to the router.
WiFi On/Off button
with LED
This button lets you use WPS to join the WiFi network without typing the WiFi password.
The WPS LED blinks white during this process and then lights solid white.
WPS button with LED
Rear panel
The following figure shows the rear panel connectors and buttons.
Figure 2. Router rear panel
User Manual
12
Hardware Setup
Nighthawk AC2300 Cybersecurity WiFi Router Model RS400
