5G Mobile Hotspot
M6
5G Mobile Router
Quick Start
Get to know your mobile hotspot
What’s in the box
•
Nighthawk® M6 5G Mobile Hotspot
•
Battery cover
•
Battery
•
USB Type C cable
•
AC adapter
Set up your mobile hotspot
1. Press and hold the
Power
button for 2 seconds.
To better safeguard your network, the first time you turn
on your mobile hotspot, you are asked to set up your login
credentials.
2.
Follow the onscreen instructions to customize your mobile
hotspot settings.
LCD home screen
The home screen displays your mobile hotspot’s WiFi network
name and password, and the mobile network signal strength and
connection type.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
September 2022
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of
NETGEAR, Inc. Any non‑NETGEAR trademarks are used for reference
purposes only.
Install the SIM and battery
Do not use a tool, pen, or paperclip to insert or remove the nano
SIM card. Doing so might cause damage to your mobile hotspot
that is not covered by the warranty.
1. Verify the SIM orientation as shown on the product label.
2. Gently insert the nano SIM card.
The nano SIM card must have
an active data plan with your
operator.
3. Insert the battery.
4. Install the back cover.
5. To charge the battery, connect
the USB cable to the mobile
hotspot and then plug it into
either:
•
A wall socket, using the
AC adapter (faster charge
option).
•
A USB port on your laptop.
Signal
strength
Battery
Mobile
network
QR code
for quick
connect to
WiFi
WiFi network
name and
password
Use the battery or AC power
This mobile hotspot can operate on battery when you’re away from
your home or the office. The Power Manager settings allow you to
further optimize battery life.
This mobile hotspot can also operate without a battery using the
supplied AC adapter. For extended periods on AC power, we
recommend removing the battery to extend the battery life.
Ethernet
port
External
antenna
port (TS-9)
External
antenna
port (TS-9)
USB
Type C
port
Power button
Home
Back
Touch
screen
nano
SIM
card
Reset
button
Before setting up your mobile hotspot, note
that it requires a nano SIM card to connect to
your mobile provider’s network. To get a valid
and provisioned nano SIM card, contact your
mobile provider. For information about
contacting mobile providers and information
you might need to provide your mobile provider,
use the QR code or visit
https://www.netgear.com/mobile‑setup
.
To download the user manual, scan the QR
code or visit
http://www.netgear.com/m6usermanual
NETGEAR INTERNATIONAL LTD
Floor 1, Building 3,
University Technology Centre
Curraheen Road, Cork,
T12EF21, Ireland
