manualshive.com logo in svg

NETGEAR Nighthawk C6900, Руководство пользователя

Поделиться
Скачать
NETGEAR Nighthawk C6900 Скачать руководство пользователя страница 31

Nighthawk AC1900 WiFi Cable Modem Router 

Control Access to the Internet User 

Manual

32

Block Access to Your Network

You can use access control to block access to your network.

To set up access control:

1. 

Launch an Internet browser from a computer or wireless device that is connected to the 

network.

2. 

Type 

http://www.routerlogin.net 

or 

http://www.routerlogin.com

.

A login window opens.

3. 

Enter the user name and password.

The user name is 

admin

. The user name and password are case-sensitive.

The BASIC Home page displays.

4. 

Select 

ADVANCED > Security > Access Control

.

5. 

Select the 

Turn on Access Control

 check box.

You must select this check box before you can specify an access rule and use the Allow 
and Block buttons. When this check box is cleared, all devices are allowed to connect, 
even if the device is in the blocked list.

6. 

To specify the access rule, select one of the following radio buttons:

•

Allow all new devices to connect

. With this setting, if you buy a new device, it can 

access your network. You don’t need to enter its MAC address in this page. 
NETGEAR recommends that you leave this radio button selected.

•

Block all new devices from connecting

. With this setting, if you buy a new device, 

before it can access your network, you must enter its MAC address for an Ethernet 
connection and its MAC address for a WiFi connection in the allowed list.

The access rule does not affect previously blocked or allowed devices. It applies only to 
devices joining your network in the future after you apply these settings.

7. 

To allow the computer or device you’re currently using to continue to access the network, 

select the check box next to your computer or device, and click the 

Allow

 button.

8. 

Click the 

Apply

 button.

Your changes take effect.

Use Keywords to Block Internet Sites

You can use keywords to block certain Internet sites from your network. You can use blocking 
all the time or based on a schedule.

Содержание Nighthawk C6900































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды