background image

11

Technical Support

Thank you for selecting NETGEAR products. 

After installing your device, locate the serial number on the label of 
your product and use it to register your product at 

www.NETGEAR.com/register

.

 Registration is required before you can 

use the telephone support service. Registration through the 
NETGEAR website is strongly recommended.

Go to 

http://support.netgear.com

 for product updates and web 

support. 

For complete DoC go to the NETGEAR EU Declarations of 
Conformity website at 

http://support.netgear.com/app/answers/detail/a_id/11621/

.

For GNU General Public License (GPL) related information, go to  

http://support.netgear.com/app/answers/detail/a_id/2649

.

WARNING:

 

Do not stack equipment, or place equipment in tight 

spaces, in drawers, or on carpets. Make sure your equipment is 
surrounded by at least 2 inches of air space.

Compliance

This symbol is placed in accordance with the European Union 

Directive 2002/96 on the Waste Electrical and Electronic Equipment 

(the WEEE Directive). If disposed of within the European Union, this 

product should be treated and recycled in accordance with the laws 

of your jurisdiction implementing the WEEE Directive.

Full_IG.book  Page 11  Monday, January 9, 2012  6:11 PM

Содержание JGS524FNA













Отзывы: