WARNING:
Do not interrupt the network connection or power to the switch during
the firmware update process. Do not disconnect any Ethernet cables or power off
the switch until the firmware update process and switch reboot are complete. Doing
so can damage the switch.
Your switch web session is disconnected and you must log back in to the device UI.
Manage the configuration file
The switch stores its configuration settings in a configuration file. You can back up your
switch's configuration settings by saving the configuration file to your computer. Later,
if you need to restore your settings, you can load the saved configuration file from your
computer to the switch.
Back up the switch configuration
You can save a copy of the switch's current configuration settings to your computer so
that you can restore the configuration settings from this backup file later if needed.
To back up the configuration settings switch of the switch:
1. Open a web browser from a computer that is connected to the same network as the
switch, or connected directly to the switch through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
A login window opens.
3. Enter the device management password.
The password is the one that you specified the first time that you logged in. The
password is case-sensitive.
The HOME page displays.
4. From the menu at the top of the page, select SETTINGS.
5. From the menu on the left, select CONFIGURATION FILE.
The RESTORE CONFIGURATION page displays.
6. Click the BACKUP tab.
The BACKUP CONFIGURATION page displays.
7. Click the BACKUP button.
8. Follow the directions in your browser to save the file.
User Manual
72
Maintain and Monitor the Switch
Gigabit Ethernet Plus Switches