NETGEAR GS308T Скачать руководство пользователя страница 1

Installation Guide

1. Register With the NETGEAR Insight App

Use the NETGEAR Insight App to register your switch.

1.  On your iOS or Android mobile device, visit the app store, search for 

NETGEAR Insight, and download the latest app.

2.  Open the NETGEAR Insight app.
3.  If you did not set up a NETGEAR account, tap 

Create NETGEAR Account 

and 

follow the onscreen instructions.

4.  Enter the email address and password for your account and tap 

LOG IN

.

5.  Tap 

+

 in the upper right corner.

6.  Either use the camera on your phone to scan the serial number bar code 

located on the bottom of the switch, or type in the serial number. 

7.  Tap 

Go

.

8.  Tap 

View Device

 to add the switch to a network.

The switch is registered and added to your account.

NETGEAR® S350 Series 8-Port Gigabit Ethernet 
Smart Managed Pro Switch (GS308T)
NETGEAR® S350 Series 8-Port Gigabit PoE+ 
Ethernet Smart Managed Pro Switch with 2 SFP 
Ports (GS310TP)

Package Contents

•  Switch model GS308T or GS310TP
•  GS308T power adapter (varies by region) or   

GS310TP adapter with detatchable power cord (varies by region)

•  Installation guide

2. Connect the Switch

Sample Connections

Note: 

For more information, see the hardware installation guide which you can 

download from 

https://www.netgear.com/support/

.

3. Check the PoE Status (GS310TP Only)

PoE+ power is provided by the GS310TP switch on ports 1-8. The switch can 
supply up to 30W PoE+ (IEEE 802.3at) to each port, with a maximum PoE power 
budget of 55W across all active PoE+ ports.
The PoE Max LED indicates the status of the PoE budget on the switch:
• 

Off

. Sufficient (more than 7W of) PoE power is available.

• 

Solid yellow

. Less than 7W of PoE power is available.

• 

Blinking yellow

. At least once during the previous two minutes, less than 7W 

of PoE power was available.

4. Discover the IP Address

An IP address is required to configure your switch. The switch gets an IP 

address from a DHCP server (such as your router) by default. If your switch is not 
connected to a DHCP server, use the default IP address: 192.168.0.239.

Note: 

Make sure that you are using the latest version of the app.

1.  On your mobile device, connect with WiFi to the same router as the switch.
2.  Open the NETGEAR Insight app and log in to your account.

The current IP address of the switch is displayed.

Sample Connections

GS308T switch

Router

IP camera

ReadyNAS

Gaming console

Smart TV

Internet

Laptop

Desktop

Desktop

GS310TP switch

Router

PoE IP camera

ReadyNAS

PoE Phone

PoE VoIP/Video

Internet

Desktop

Desktop

PoE Access Point

Continued on the other side.

Отзывы: