NETGEAR GS108Tv3 Скачать руководство пользователя страница 199 | Manualshive

Страница: 199 / 492

NETGEAR GS108Tv3 Скачать руководство пользователя страница 199

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)

Cloud

Management

Configure Switching

User Manual

199

By default, the local device password is

password

.

•

If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.

For information about the credentials, see

Credentials for the local browser interface on

5.

Click the

Login

button.

The System Information page displays.

6.

Select

Switching



> Multicast > Auto-Video

.

The Auto-Video Configuration page displays.

7.

Select one of the following radio buttons:

•

Select the

Disable

radio button to globally disable Auto-Video administrative mode

for the switch. This is the default setting.

•

Select the

Enable

radio button to globally enable Auto-Video administrative mode for

the switch.

8.

Click the

Apply

button.

Your settings are saved.

The Auto-Video VLAN field displays the Auto-Video VLAN ID that is configured on the
switch. By default, this VLAN ID is 4089.

Manage IGMP snooping

Internet Group Management Protocol (IGMP) snooping is a feature that allows a switch to
forward IPv4 multicast traffic intelligently. Multicast IPv4 traffic is traffic that is destined to a
host group. Host groups are identified by class

D IP addresses, which range from 224.0.0.0

to 239.255.255.255. Based on the IGMP query and report messages, the switch forwards
traffic only to the ports that request the multicast traffic. This prevents the switch from
broadcasting the traffic to all ports and possibly affecting network performance.

A traditional Ethernet network can be separated into different network segments to prevent

placing too many devices onto the same shared media. Bridges and switches connect these
segments. When a packet with a broadcast or multicast destination address is received, the
switch forwards a copy to each of the remaining network segments in accordance with the
IEEE MAC Bridge standard. Eventually, the packet is made accessible to all nodes
connected to the network.

This approach works well for broadcast packets that are intended to be detected or
processed by all connected nodes. For multicast packets, this approach could lead to a less
efficient use of the network bandwidth, particularly when the packets are intended for a small
number of nodes only. Packets are flooded into network segments where no node is
receptive to the packet. Although nodes rarely incur any processing overhead to filter packets
addressed to unrequested group addresses, the nodes cannot transmit new packets onto the

«
...
197
198
199
200
201
...
»

Содержание GS108Tv3













































































































































































































































































































































































































































































































Отзывы:

Нет отзывов