NETGEAR GS108Tv3 Скачать руководство пользователя страница 107 | Manualshive

Страница: 107 / 492

NETGEAR GS108Tv3 Скачать руководство пользователя страница 107

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)

Cloud

Management

Configure System Information

User Manual

107

Configure SNMPv1 and SNMPv2 trap flags

You can enable or disable traps that the switch can send to an SNMP manager. When the
condition identified by an active trap is encountered by the switch, a trap message is sent to
any enabled SNMP trap receivers, and a message is written to the trap log.

To configure the trap flags:

1.

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.

2.

Launch a web browser.

3.

In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see

Access the switch on-network and

connected to the Internet on page

Access the switch off-network on page

.

The login page displays.

If the NETGEAR Business page displays, see

Register and access the switch with your

NETGEAR account on page

4.

Enter one of the following passwords:

•

After registration, enter the local device password.

By default, the local device password is

password

.

•

If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.

For information about the credentials, see

Credentials for the local browser interface on

5.

Click the

Login

button.

The System Information page displays.

6.

Select

System > SNMP > SNMP V1/V2 > Trap Flags

.

The Trap Flags page displays.

7.

Enable or disable the following system traps:

•

Authentication

. When enabled, SNMP traps are sent when events involving

authentication occur, such as when a user attempts to access the switch local
browser interface and does not provide a valid user name and password. The default
is Enable.

•

Link Up/Down

. When enabled, SNMP traps are sent when the administrative or

operational state of a physical or logical link changes. The default is Enable.

•

Spanning Tree

. When enabled, SNMP traps are sent when various spanning tree

events occur. The default is Enable.

8.

Click the

Apply

button.

Your settings are saved.

«
...
105
106
107
108
109
...
»

Содержание GS108Tv3













































































































































































































































































































































































































































































































Отзывы:

Нет отзывов