FS726TP
ProSafe™ 24 Port 10/100 Smart Switch
with 2 Gigabit Ports and PoE
Two Gigabit Ports Plus Easy Browser -
based
Management
NETGEAR ProSafe Smart Switches fill the gap between unmanaged and fully managed switches. The family
of ProSafe Smart Switches is designed for growing businesses that want control over their network without
the cost and complexity of a full Layer 2/Layer 3 management implementation. This PoE capable Smart
Switch, FS726TP, provides power and data over the same Cat-5 cable to enable affordable PoE solutions
for mid-sized businesses. Using built-in standards based IEEE 802.3af PoE, the FS726TP offers web-based
management including prioritization and SNMP making it ideal for deploying access points, VoIP phones
and IP-based surveillance cameras. Two built-in Gigabit ports provides fast connections to servers or a
Gigabit-speed backbone. With the utility of 24 10/100 Mbps ports, two copper 10/100/1000 ports and
two hot-swappable Small Form-factor Pluggable (SFP)* GBIC slots for optional fiber connectivity, growing
business networks, classrooms and workgroups can benefit from superior performance and keep up with
expanding network needs. This high performing switch features a non-blocking wire-speed architecture
with an 8.8Gbps switching capacity for maximum data throughput. All 26 RJ-45 ports automatically negotiate
to the highest speed and support Auto Uplink™ technology to make the right link.
In addition, an intuitive, Web-browser interface offers the simple Smart Switch management, making it a
snap to monitor switch performance, configure ports, even set up port trunks, VLANs, and traffic prioritization.
Alternatively, use SNMP-based software to manage your Smart Switch. Shipped ready for use straight out of
the box, it delivers switching that’s easy to set up and use. NETGEAR ProSafe Smart Switches are ideal for
adding basic management to your unmanaged networks and extending your managed networks.
Choose to plug in up to 24 Ethernet or Fast Ethernet devices and mix in up to 12 802.3af IP-based devices.Power-over-Ethernet
(PoE), optimizes the installation and power management of network devices such as wireless access points (AP), Voice over IP
(VoIP) phones, and IP-based surveillance cameras. Power-over-Ethernet (IEEE 802.3af ) capabilities reduce installation time
and costs for many new network productivity devices. Free your wireless AP deployments and IP cameras from the restrictions of
power outlet proximity and enable uninterruptible power supply for all your PoE devices.
Web-based Smart management features include performance monitoring, port configuration, VLAN for traffic control, port
trunking for increased bandwidth, and Class of Service (CoS) for traffic prioritization. Optimized for ProSafe Network
Management Software (NMS100) and works with other SNMP-based management software.
LEDs on the front panel make switch status easy to observe and troubleshooting easy to accomplish. Use as an unmanaged
switch for plug & play operation or use the Smart Wizard to easily access the intuitive web-based management features.
Made to last, this durable switch is housed in a 17" metal box and is backed by a five-year warranty. Comes complete with
a rack mounting kit. Works with Windows, Macintosh O/S, Linux and Netware Operating systems.** One and three year
Premium Support Packs available.
* Use with NETGEAR's ProSafe AGM 731F 1000BASE-SX SFP GBIC module or NETGEAR's AGM 732F 1000BASE-LX SFP GBIC module
** Requires PC running Windows for initial Smart Switch access
Flexible
Sharp
Convenient
Reliable
• Help is there when you need it!
NETGEAR provides 24x7
technical support in English,
with selected local language
support during office hours.
IP Camera
Internet
FVS114 ProSafe
VPN Firewall 8
Desktop PCs with
FA311 10/100 NICs
Servers with
GA311 Gigabit NICs
FS726TP ProSafe 24 Port
10/100 Smart Switch
with 2 Gigabit Ports and PoE
Gigabit Links
VIoP Phones
WG302
ProSafe 802.11g
Wireless Access Point
Notebook PCs with
WG511T 54 Mbps
Wireless PC Card
