Factory Default Settings
To reset the extender to factory default settings, you can use the Reset button on the side panel or you can
log in and click the onscreen RESET button. For more information, see
Return the Extender to Its Factory
on page 41.
The following table shows the factory default settings.
Table 2. Factory default settings
Default Settings
Feature
Enabled
Smart Setup
Enabled
WiFi communication
NETGEAR_EXT
WiFi network name (SSID)
Disabled
Security
Auto
1
Transmission speed
Varies by region
Country/region
802.11a/b/g/n/ac
Operating mode
Max 400 Mbps
Data rate in the 2.4 GHz band
Disabled by default
(When enabled the max data rate is 866.7Mbps)
Data rate in the 5 GHz low band
Disabled by default
(When enabled the max data rate is 866.7Mbps)
Data rate in the 5 GHz high band
Server and client are enabled
DHCP
1
Maximum WiFi signal rate (IEEE Standard 802.11). Actual throughput can vary. Network conditions and environmental
factors, including volume of network traffic, building materials and construction, and network overhead lower actual data
throughput rate.
Supplemental Information
53
Nighthawk X6 AC2200 Tri-Band WiFi Range Extender