Try these troubleshooting steps:
•
Make sure that the Client Link LED is white and that you are using a valid IP address.
•
Relaunch the web browser and enter
www.mywifiext.net
in the address field. Enter
your admin user name and password and click the
LOG IN
button.
•
If you are installing the extender as an access point, make sure that you are connecting
your computer or WiFi device to the extender through a WiFi connection instead of
an Ethernet connection.
•
Make sure that your computer is set up to use DHCP (most are).
I forgot my admin user name address and password. What can I do?
On the login window, click the
Username & Password Help
link to answer the security
questions that you set up during the initial setup. For more information, see Recover a
forgotten user name or password on page 45.
To restore factory settings:
1. Use a sharp object such as a pen or paper clip to press and hold the
Reset
button
on the extender for seven seconds until the Power LED lights amber.
2. Release the
Reset
button and wait for the extender to reboot.
The extender resets and returns to the factory default settings.
Find the extender’s IP address
If your extender and router use the same WiFi network name (SSID) and you want to
log in to your extender using an Android device, you must use the extender’s IP address.
You can log in to your router to find your extender’s IP address. If you own a NETGEAR
router, use the following procedure to find the extender’s IP address. If you do not own
a NETGEAR router, see your router's documentation.
Note:
The following instructions might not apply to your NETGEAR router. For more
information, see your NETGEAR router’s user manual.
To log in to your extender and find your extender’s IP address:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter
http://www.routerlogin.net
.
A login window opens.
3. Enter the router admin user name and password.
User Manual
58
FAQs and troubleshooting
AC2200 Nighthawk X4 X4 WiFi Mesh Extender
