Manage Your Network
51
N300 Wireless ADSL2+ Modem Router DGN2200Mv2
Remote Management
Remote management lets you enable a user or users on the Internet to configure, upgrade,
and check the status of your wireless modem router.
Note:
Be sure to change the wireless modem router’s default password to
a very secure password. The ideal password should contain no
dictionary words from any language, and should be a mixture of
letters (both upper case and lower case), numbers, and symbols.
Your password can be up to 30 characters.
To configure remote management:
1.
Select
Advanced > Remote Management
.
2.
Select the
Turn Remote Management On
check box.
3.
Specify the external addresses allowed to access the router remotely. For security, restrict
access to as few as practical:
•
To allow access from any IP address on the Internet, select
Everyone
.
•
To allow access from a range of IP addresses, select
IP address Range
. Then enter
a beginning and ending IP address to define the allowed range.
•
To allow access from a single IP address on the Internet, select
Only this Computer
.
Enter the IP address that will be allowed access.
4.
Specify the port number that will be used for accessing the router menu.