Wireless Network Configuration
22
N300 Wireless ADSL2+ Modem Router DGN2200Mv2
Manually Configure Wireless Settings
Note:
If you use a wireless computer to change the wireless network name
(SSID) or wireless security, you will be disconnected when you click
Apply
. To avoid this problem, connect your computer to the router
with an Ethernet cable while you are making changes.
To view or manually configure the wireless settings:
1.
Select
Wireless Settings
to display the following screen:
Note:
South Africa falls under the Europe region for Wi-Fi.
The settings for this screen are explained in
2.
Select the region in which the wireless modem router will operate.
3.
For initial configuration and test, leave the other settings unchanged.
4.
To save your changes, click
Apply
.
5.
Configure and test your computers for wireless connectivity.
Set up your wireless computers with the same SSID and wireless security settings as
your wireless modem router. Check that they have a wireless link and are able to obtain
an IP address by DHCP from the wireless modem router. If there is interference, adjust
the channel
