Internet Configuration
13
N300 Wireless ADSL2+ Modem Router DGN2200Mv2
2.
Enter your settings. In order to connect to the network, an active broadband service account
is Required. Contact your ISP for username, password. and the network name
•
Username
. Account login username.
•
Password
. Account password for authentication.
•
Connect automatically at startup
. If selected, the modem will automatically connect
to the network upon powered up. This should be selected after login information is
provided.
•
Reconnect automatically when connection is lost
. If selected, the modem will
attempt to reconnect to the network when the connection is lost. Under normal
situation, this setting should be selected.
•
Roaming automatically
. If checked, it may roam to any available operator in range
and may incur roaming charges.
•
Connection Status
. Current WAN port status.
3.
When done, select any of the following:
•
Click
Connect
when you want to manually connect to the network.
•
Click
Disconnect
when you want to manually disconnect from current network.
•
Click
Apply
when you finish changing the settings.
•
Click
Cancel
to discard changes.
•
Click
Refresh
to update connection status
Basic ISP Settings
To configure the basic settings manually:
1.
Select
Basic Settings
.