Wireless Configuration
18
NETGEAR DOCSIS 3.0 N900 Wireless Data Gateway
8.
On the computer that just joined the wireless network, make sure you can connect to the
Internet.
You should see the gateway’s Internet LED blink, showing that the Internet connection is
in use.
Set Up Wi-Fi Multimedia
You can use the Wi-Fi Multimedia (WMM) screen to set up wireless multimedia Quality of
Service (QoS).
To set up Wi-Fi Multimedia:
1.
Log in to the gateway.
For more information, see
2.
In the main menu, under Setup, select
Wi-Fi Multimedia
.
3.
Specify the Wi-Fi Multimedia settings for either the 2.4 GHz or 5 GHz network or both.
•
WMM Support
. Select
On
to enable WMM.
•
No-Acknowledgement
. Select
Off
if you want to use Acknowledgement (ACK)
messages. Select
On
if you do now want to use acknowledgement messages.
Usually,
Off is selected
which might improve the efficiency of packet transmission. If
wireless communication quality is poor at your location, select
On
so that you are
notified when a package is lost. High interference levels can cause poor
communication.
•
Power Save Support.
To conserve battery power in smaller devices that are
connected to the gateway, select
On
.
4.
Click
Apply
.
