
•
Cycle through screens. Press and release the Power button.
•
If the factory reset via the Power button feature is enabled, perform a factory reset.
Press and hold the Power button for 3-4 seconds until the the shut down screen
displays and continue pressing and holding the Power button until the Factory Reset
screen displays. Follow the onscreen instructions to complete the factory reset.
Sleep Mode
Your device automatically enters sleep mode to save power when no Wi-Fi client
connects for more than five minutes.
In sleep mode, Wireless Radio is disabled.
Press the Power button to turn the display on and exit sleep mode.
Wireless Radio is enabled and Wi-Fi devices can reconnect to the hotspot.
The time required to recover the network connection varies by environment, settings,
etc.
Status LED
The status LED indicates data connection status:
•
Blue, slow blink. The mobile hotspot is ready.
•
Blue, double-blink. The mobile hotspot is transferring data.
•
Amber, slow blink. The mobile hotspot is not connected to the network or is in
standby mode.
Connect to the Internet
When you turn on your mobile hotspot, it automatically connects to the network in your
area. Connect your device to the mobile hotspot Wi-Fi network to access the Internet.
User Manual
10
Get Started
AirCard 797S Mobile Hotspot