Netgate XG-7100-1U Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 83

Netgate XG-7100-1U Скачать руководство пользователя страница 47

Security Gateway Manual

XG-7100-1U

Untagged traffic on ETH8 will be assigned a VLAN ID of 4091. ETH8 and the uplinks will also accept traffic that has
already been tagged with a VLAN ID of 4000 as well.

2.2 Connecting to the Console Port

There are times when directly accessing the console is required. Perhaps webGUI or SSH access has been locked out,
or the password has been lost or forgotten. This guide shows how to regain access directly through the console.

2.2.1 Install the Driver

A

Silicon Labs CP210x USB-to-UART Bridge

driver is used to provide access to the console, which is exposed via

the

USB Mini-b (5-pin)

port on the appliance.

If needed, install an appropriate

Silicon Labs CP210x USB to UART Bridge

driver on the workstation used to connect

with the system.

Windows

There are drivers available for Windows

available for download

Mac OSX

There are drivers available for Mac OSX

available for download

For Mac, choose the

Macintosh OSX

download.

Linux

There are drivers available for Linux

available for download

FreeBSD

Recent versions of FreeBSD include this driver and will not require manual installation.

© Copyright 2020 Rubicon Communications LLC

45

«
...
45
46
47
48
49
...
»

Содержание XG-7100-1U




















































































Отзывы:

Нет отзывов