0 OVERVIEW
This manual is intended to get you started with the
Powertimer
SW-300
for Palm and is divided into following chapters:
• Chapter 1 gives a description of the elements of the Power-
timer system. If you are already familiar with Groups, Sub-
jects, Sessions etc. you can skip most of this chapter. Just
check chapter 1.8 since it describes some synchronization
issues.
• Chapter 2 introduces you to the graphical elements of
Pow-
ertimer SW-300
user interface. However, if you are familiar
with Palm and want to start testing quicker, just skip direct-
ly to chapter 3 and check chapter 2 if you are having prob-
lems with the user interface.
• Chapter 3 gives a tutorial on how to perform a Drop Jump
test. After this chapter you should be familiar with the basics
of testing.
• Chapter 4 gives an introduction to test result viewing.
• Chapter 5 gives a tutorial how to train the subjects with
Pow-
ertimer SW-300
.
• Chapter 6 introduces the subject and group management
functions.
• Chapter 7 introduces all other functions that are available
in
Powertimer SW-300
. After chapter 7 you should be famil-
iar with the system and able to perform all the functions that
can be done with it.
• Chapter 8 gives a detailed description of each test in the
Powertimer SW-300
. It can be used as a reference until you
are familiar with the tests.
OVERVIEW
0
