23
6 SUBJECT AND GROUP MANAGE-
MENT
The previous chapters assumed that you had created the sub-
jects and groups with the
Powertimer Analyzer
and uploaded
them into the
Powertimer SW-300
. This chapter explains how
to manage groups and subjects with the
Powertimer SW-300
.
6.1 Groups
Properties of
Test Groups
were defined in chapter 1.1. This
chapter explains how those properties are changed and how
new groups are created using the
Powertimer SW-300
.
Adding a new group
To add a new group, tap on the
Groups
button in the
Main
View
. This enters the
Group Manager
shown in Figure 36.
From the
Group Manager
choose the
Add New Group
action
and tap on the
Do Action
button. This enters the
Edit Group
view shown in Figure 37.
The
Group Description
is optional and can be left blank, but
the
Name
is mandatory, since it identifies the group. It is pos-
sible to have multiple groups with the same name, but in that
case selecting the proper group from a list or selector will be
SUBJECT
AND
GROUP
MANAGEMENT
6
Figure 36
Group Manager
