NTC-6000 Series V.250 Manual
Page 27 of 32
To suit software version 1.1.0
7/21/2010
Miscellaneous, system, test and diagnostic commands
^RESET
Reset the cellular router
This command initiates a soft reset (reboot) of the NTC, any active PAD and
cellular packet data sessions are abruptly terminated.
Default:
N/A
Storage:
NA
Command values:
N/A
^FACTORY
Reset the cellular router configuration
This command resets the cellular routers configuration to factory defaults, this resets
ALL configuration data.
Default:
N/A
Storage:
Automatic
Command values:
N/A
^COPT
Configuration options.
This command can be used to show or set a number of terminal specific options.
The command expects / returns an integer value between 0 and 255 which
represents a bitmap of various options.
Default:
0
Storage:
Automatic
Command values:
^COPT=
<bitmap>
Where the bits in
<bitmap>
are defined as follows: -
1
Banner off
Do not show power on welcome message.
2
Connect message off Do not show connection progress messages.