NTC-6000 Series V.250 Manual
Page 24 of 32
To suit software version 1.1.0
7/21/2010
^MACA
Set the LAN Ethernet MAC address
This command will set the LAN interface Ethernet MAC address.
To reset the MAC address back to the factory configured address use the command
“AT^MACA=” and then reboot the router.
Default:
factory unique
Storage:
Automatic
Command values:
^
MACA
=
<MAC Address> Sets the Ethernet MAC address.
^
MACA?
Queries the current Ethernet MAC address.
^IFCG
Print the Interface Configuration
This command will print the NTC IP interface configuration details.
Default:
N/A
Storage:
N/A
Command values:
^
IFCG?
Prints the router‟s IP interface configuration details.
^PPPOE Enable PPPoE Mode
Enables or disables PPPoE mode.
Default:
0
Storage:
Automatic
Command values:
^PPPOE=0
Disable PPPoE mode.
^PPPOE=1
Enable PPPoE mode.
^MASQ
Enable DNS masquerade.
Enables or disables DNS masquerading.
Default:
0
Storage:
Automatic
Command values:
^MASQ=0
Disable DNS masquerading.
^MASQ=1
Enable DNS masquerading.