NetComm NTC-140-02 Скачать руководство пользователя страница 81

Страница: 81 / 155

www.netcommwireless.com

NetComm Wireless 4G M2M Router

UM-00012 v1.0

TR-069 configuration

To configure TR-069:

Click the Enable TR-069 toggle key to switch it to the ON position.

In the ACS URL field, enter the Auto Configuration Server’s full domain name or IP address.

Use the ACS username field to specify the username for the Auto Configuration Server.

In the ACS password and Verify ACS password fields, enter the Auto Configuration Server password.

In the Connection Request Username field, enter the username to use for the connection requests.

In the Connection Request Password and Verify password fields, enter the connection request password.

The inform message acts as a beacon to inform the ACS of the existence of the router. Click the Enable periodic ACS
informs toggle key to turn on the periodic ACS inform messages.

In the Inform Period field, enter the number of seconds between the inform messages.

Click the Save button to save the settings.

Содержание NTC-140-02




























































































































































Результаты поиска

Содержание NTC-140-02

Отзывы:

NetComm NTC-140-02, Руководство пользователя, Страница: 81 / 155

Результаты поиска

Содержание NTC-140-02

Отзывы: