NetComm NB1 Скачать руководство пользователя страница 32

Страница: 32 / 91

NB1 User Guide

YML780 Rev1

www.netcomm.com.au

WAN Setup>Modem

Here you can choose one of four ADSL handshake types, typically MMode (Multi-
mode) will work on Australian ADSL lines. You should not need to change this set-
ting unless advised by your ISP.

Option

Description

T1413:

Full-Rate (ANSI T1.413 Issue 2) with
line rate support of up to 8 Mbps down-
stream and 832 Kbps upstream.

GDMT:

Full-Rate (G.dmt, G992.1) with line rate
support of up to 8 Mbps downstream
and 832 Kbps upstream.

GLITE:

G.lite (G.992.2) with line rate support
of up to 1.5 Mbps downstream and 512
Kbps upstream.

MMODE:

Support Multi-Mode standard (ANSI
T1.413 Issue 2; G.dmt(G.992.1);
G.lite(G.992.2)).

ADSL2, 2Plus

Higher rate ADSL services gradually
being made available at various ex-
changes. Follow ISP advice on whether
this connection is suitable.

Click Apply to save the changes.

Содержание NB1




























































































Результаты поиска

Содержание NB1

Отзывы:

NetComm NB1, Руководство пользователя, Страница: 32 / 91

Результаты поиска

Содержание NB1

Отзывы: