NetComm HSPA+ M2M Скачать руководство пользователя страница 4

Страница: 4 / 16

M2M CDMA Router – SMS Tools User Guide

www.netcommwireless.com

Introduction

The M2M CDMA Router offers an advanced SMS feature set, including sending messages, receiving messages, redirecting

incoming messages to another destination, as well as supporting remote commands and diagnostics messages.
Some of the functions supported include:

Ability to send a text message via a CDMA network and store it in permanent storage.

Ability to receive a text message via a CDMA network and store it in permanent storage.

Ability to forward incoming text messages via a CDMA network to another remote destination which may be a
TCP/UDP server or other mobile devices.

Ability to receive run-time variables from the device (e.g. uptime) on request via SMS

Ability to change live configuration on the device (e.g. network username) via SMS.

Ability to execute supported commands (e.g. reboot) via SMS

Ability to trigger the M2M CDMA Router to download and install a firmware upgrade

Ability to trigger the M2M CDMA Router to download and apply a configuration file

To access the SMS messaging functions of the M2M CDMA Router, click on the Services menu item from the top menu bar, and

then select one of the options under the SMS messaging section on the left hand menu.

Setup

The Setup page provides the options to enable or disable the SMS messaging functionality and SMS forwarding functionalities of

the router. SMS messaging is enabled by default.

Figure 1 - General SMS Configuration

Содержание HSPA+ M2M
















