| AIMWLLR0-35
4
Device overview
ITEM
DESCRIPTION
1
Connector
protective cap
Protects the connector from dust and moisture when the
Antenna Alignment Tool is not in use.
2
Power button
Push once to toggle the Antenna Alignment Tool on and
off. When not connected to the antenna and turned
on, the Antenna Alignment Tool displays the remaining
battery charge level. See the LED indicator section
for details on the battery level indication. When it is
turned on, if it is not connected to the antenna within
approximately 20 seconds, the Antenna Alignment Tool
turns off automatically. When the Antenna Alignment
Tool is disconnected from the antenna, it powers off
automatically.
3
Micro USB
port to charge
the battery
The Micro USB port connects to a USB power source
using the supplied USB cable to charge the internal
battery. Connect the Antenna Alignment Tool to a 5V/2A
power source for optimum charging speed.
4
Multipurpose
LED indicators
The LED indicators on the Antenna Alignment Tool are
multifunctional. They display:
1.
Remaining battery level when the battery check
button is pressed or the unit is charging (Battery
check mode)
2.
RF signal strength during alignment (Cell scanning
mode)
3.
System status when the outdoor antenna is in
normal operation (Normal operation mode).
See the LED indicator section for more information.
QSG-00097 rev 7 AIMWLLR0-35 [NRB-0200] QSG.indd 4
21/12/2016 2:02 PM
All manuals and user guides at all-guides.com
