NetApp SteelStore 30 Series, Руководство пользователя

Страница: 10 / 71

Safety
5
Chapter 1
Safety
Follow the safety precautions outlined in this chapter and in the Safety and Compliance Guide when
installing and setting up your equipment.
Important Failure to follow these safety guidelines can result in injury or damage to the equipment.
Mishandling of the equipment voids all warranties. Read and follow safety guidelines and
installation instructions carefully.
Many countries require the safety information to be presented in their national languages. If this
requirement applies to your country, consult the
Safety and Compliance Guide . Before you install,
operate, or service the NetApp products, you must be familiar with the safety information. Refer to the
Safety and Compliance Guide if you do not clearly understand the safety information provided in the
product documentation.
1.1 Safe Handling
Caution If this equipment is used in a manner not specified by the manufacturer, the protection provided by the
equipment may be impaired.
All plug-in modules and blanking plates are part of the fire enclosure and must only be removed when
they can be immediately replaced. The system must not be run without all units in place. To comply with
applicable safety, emission and thermal requirements, no covers should be removed and all bays must
be fitted with plug-in modules.
Permanently unplug the unit if you think that it has become damaged in any way.
Unplug the unit before moving it.
Warning A fully assembled SteelStore can weigh up to 32 kg (71 lb) or 18 kg (40 lb) without drives installed.
Do not try to lift it by yourself.