NetApp HCI, Руководство пользователя

Страница: 321 / 363


If you get the
Auth Error TypeError: Failed to fetch
error message after
you attempt to authorize, you might need to accept the SSL certificate for the MVIP
of your cluster. Copy the IP in the Token URL, paste the IP into another browser tab,
and authorize again. If you attempt to run a command after the token expires, you
get a
Error: UNAUTHORIZED
error. If you receive this response, authorize again.
3. Close the Available authorizations dialog box.
4. Select GET/assets .
5. Select Try it out .
6. Select
Execute .
Scroll down in the response body to the Compute section, and copy the parent and id values for the failed
compute node.
7. Select DELETE/assets/{asset_id}/compute-nodes/{compute_id} .
8. Select
Try it out .
Enter the parent and id values you got in step 7.
9. Select Execute .
Add the compute node to the cluster
You should add the compute node back to the cluster. The steps vary depending on the version of NetApp HCI
you are running.
NetApp HCI 1.6P1 and later
You can use NetApp Hybrid Cloud Control only if your NetApp HCI installation runs on version 1.6P1 or later.
What you’ll need
• Ensure that the vSphere instance NetApp HCI is using has vSphere Enterprise Plus licensing if you are
expanding a deployment with Virtual Distributed Switches.
• Ensure that none of the vCenter or vSphere instances in use with NetApp HCI have expired licenses.
• Ensure that you have free and unused IPv4 addresses on the same network segment as existing nodes
(each new node must be installed on the same network as existing nodes of its type).
• Ensure that you have the vCenter administrator account credentials ready.
• Ensure that each new node uses the same network topology and cabling as the existing storage or
compute clusters.
Steps
1. Open a web browser and browse to the IP address of the management node. For example:<br> <code><a
href="https://&lt;ManagementNodeIP&gt" class="bare">https://&lt;ManagementNodeIP&gt</a>;</code>
2. Log in to NetApp Hybrid Cloud Control by providing the NetApp HCI storage cluster administrator
credentials.
3. In the Expand Installation pane, select Expand .
4. Log in to the NetApp Deployment Engine by providing the NetApp HCI storage cluster administrator
credentials.
5. On the Welcome page, select Yes .
6. On the End User License page, perform the following actions: