NetApp CN1610, Справочник команд интерфейса командной строки

Страница: 143 / 708

140 CLI Output Filtering Commands
CLI Output Filtering Commands
show xxx |include
“ string ”
The command xxx is executed and the output is filtered to only show lines
containing the “ string ” match. All other non-matching lines in the output are
suppressed.
The following shows an example of the CLI command.
(CN1610) #show running-config | include “spanning-tree”
spanning-tree configuration name "00-02-BC-42-F9-33"
spanning-tree bpduguard
spanning-tree bpdufilter default
spanning-tree forceversion 802.1w
show xxx |include
“ string ” exclude
“ string2 ”
The command xxx is executed and the output is filtered to only show lines
containing the “ string ” match and not containing the “ string2 ” match. All other
non-matching lines in the output are suppressed. If a line of output contains both
the include and exclude strings then the line is not displayed.
The following shows example of the CLI command.
(CN1610) #show running-config | include “spanning-tree” exclude
“configuration”
spanning-tree bpduguard
spanning-tree bpdufilter default
spanning-tree forceversion 802.1w
show xxx |exclude
“ string ”
The command xxx is executed and the output is filtered to show all lines not
containing the “ string ” match. Output lines containing the “ string ” match are
suppressed.
The following shows an example of the CLI command.
(CN1610) #show interface 0/1
Packets Received Without Error................. 0
Packets Received With Error.................... 0
Broadcast Packets Received..................... 0
Receive Packets Discarded...................... 0
Packets Transmitted Without Errors............. 0
Transmit Packets Discarded..................... 0