28
NetApp AltaVault Cloud Integrated Storage Installation and Service Guide for Physical Appliances
Connecting the system
Connecting the controller to the networks
7.
Ensure the latch release for the QSFP end of the cable is facing down.
8.
Insert the QSFP end of the cable into QSFP port on the rear of the shelf. You will hear a distinct click when the
cable latches securely into the port.
9.
Verify the latch is secure in the Mini-SAS HD port on the controller:
Tug the release latch to verify that the cable is latched securely.
If you do not hear the click sound or if the cable slips out easily, pull the latch release to remove the cable,
and reinstall the cable.
10.
Based on the cabling diagram selected for your deployment, repeat the steps for each cable connection until all of
the supported cable connections for the selected configuration are complete.
Connecting the controller to the networks
Connect the management port (wrench icon) on your controller to the Ethernet switch in your management network,
using a network cable. See your network administrator for help connecting to your switches:
Connect 10GigE ports or GigE ports for data connections:
Connecting the controller to a computer
Use the serial console to configure an IP address for the management and serial console interfaces of the AltaVault
appliance, using a Windows client. Afterward, further AltaVault configuration can be done using a Web browser and
connecting to the management IP address.
To connect the controller to a computer
1.
Connect the network cable to the primary (wrench icon) port.
Содержание AltaVault Cloud Integrated Storage 4.1
Страница 2: ......
