NetApp AltaVault AVA400 Скачать руководство пользователя страница 75

Страница: 75 / 276

NetApp AltaVault Cloud Integrated Storage Administration Guide

Beta Draft

Configuring log settings

Configuring system administrator settings

You can also schedule a log rotation based on time or the amount of disk space the log uses, described next.

Under Logging Configuration, complete the configuration as described in this table.

Click

Apply

to apply your changes to the running configuration.

To add or remove a log server

Under Remote Log Servers, complete the configuration as described in this table.

Control

Description

Minimum Severity

Select the minimum severity level for the system log messages. The log contains all messages with

this severity level or higher. Select one of the following levels from the drop-down list:

• Emergency - Emergency, the system is unusable.

• Alert - Action must be taken immediately.

• Critical - Conditions that affect the functionality of the AltaVault.

• Error - Conditions that probably affect the functionality of the AltaVault.

• Warning - Conditions that could affect the functionality of the AltaVault, such as authentication

failures.

• Notice - Normal but significant conditions, such as a configuration change.

• Info - Informational messages that provide general information about system operations. This is

the default setting.

This control applies to the system log only. It does not apply to the user log.

Maximum Number of
Log Files

Specify the maximum number of logs to store. The default value is 10.

Lines Per Log Page

Specify the number of lines displayed per page when viewing the logs. The default value is 100.

Rotate Based On

Specifies the rotation option:

• Time - Select Day, Week, or Month from the drop-down list. The default setting is Day.

• Disk Space - Specify how much disk space, in megabytes, the log uses before it rotates. The

default value is 16 MB.

The log file size is checked at 10-minute intervals. If there is an unusually large amount of logging
activity, it is possible for a log file to grow larger than the set disk space limit in that period of time.

Control

Description

Add a New Log Server

Displays the controls for configuring new log servers.

Server IP

Specify the server IP address.

Содержание AltaVault AVA400





















































































































































































































































































Результаты поиска

Содержание AltaVault AVA400

Отзывы:

Бренды по названию

Популярные бренды

NetApp AltaVault AVA400, Руководство администратора

Результаты поиска

Содержание AltaVault AVA400

Отзывы:

Бренды по названию

Популярные бренды