NetApp AltaVault AVA400, Руководство администратора

Страница: 152 / 276

152
NetApp AltaVault Cloud Integrated Storage Administration Guide
Beta Draft
Viewing reports and logs Viewing the appliance monitoring report
To upload the capture file to NetApp support
1. In continuous mode, on the TCP Dumps page, select the running capture and click Stop Selected Captures .
For timed captures that are complete, skip to Step 2.
The capture appears as a download link in the list of Stored TCP Dumps.
2. Select the capture filename.
3. Optionally, specify a case number that corresponds to the capture. NetApp Support recommends using a case
number. For example, 194170.
To specify a URL instead of a case number, you must use the CLI. You can enter the CLI command file tcpdump
upload URL . When you specify a URL, the capture file goes directly to the URL.
If the URL points to a directory on the upload server, it must have a trailing backslash (/).
For example:
ftp://ftp.netapp.com/incoming/
(not ftp://ftp.netapp.com/incoming)
The filename as it exists on the appliance will then match the filename on the upload server.
For details, see the NetApp AltaVault Cloud Integrated Storage Command-Line Interface Reference Guide .
4. Click Upload .
A a progress bar displays the percentage of the total upload completed, the case number (if applicable), and the date
and time the upload began. When the capture file finishes uploading, the date, time, and a status of either uploaded
(appears in green) or failed (appears in red).
Successful uploads show the status, the case number (if applicable), and the date and time the upload finished.
For uploads that fail, an explanation, the case number (if applicable), and the upload starting date and time appear.
Viewing the appliance monitoring report
The Appliance Monitoring report enables you to view the health status, disk space, and cloud service status of multiple
AltaVaults using a monitoring AltaVault.