3
Brütsch/Rüegger Werkzeuge AG, Heinrich Stutz-Strasse 20, Postfach, CH-8902 Urdorf, Tel. +41 44 736 63 63, Fax +41 44 736 63 00, www.neriox.tools, [email protected]
MAN_BR
W
_vers.
July. 1
9_art. BR
W
14
1051
141051
UNIVERSAL PROTRACTOR
Operating instructions
Scope of delivery
1 main body with magnifying glass
1 150-mm straightedge
1 200-mm straightedge
1 300-mm straightedge
1 radial stop
Properties
Main body and straightedges of stainless steel
Interchangeable, sliding straightedges
Panoramic magnifier
Matt measuring scale
No-glare reading
Parallax-free Vernier reading
Legend
1.
Locking screw
2. Fine adjustment
3. Straightedge clamping screw
4. Panoramic magnifier
5. Main stop
6. Angle scale
Operation
Insert the straightedge in the guide with the groove facing upwards and, after setting the required length, fix in place using the straightedge clamping screw (3).
A bracket can be adjusted with the fine adjustment mechanism (2) and fixed with the locking screw (1). Fitting of the radial stop for the purpose of measuring internal
and external angles of grooves. Loosen the groove bolt of the radial stop by approx. 16-18 mm, and insert in the intermediate space of the main stop (5). The bolt must
be completely inserted and then turned through 90 degrees. Finally, fix the radial stop in place using the locking screw. Some examples of use are given below.
Instructions for care:
A cleaning agent and a soft cloth can be used for cleaning the
surfaces.
Specification
Angle reading:
4 x 90°
Angle resolution: 5‘ (1/12°)
Properties
Rust-free, hardened and finely ground
Matt chrome-plated measuring scale
Parallax-free Vernier reading
Panoramic magnifier included
Fine adjustment included
Repair
If the instrument is defective, please contact our
service centre → [email protected]
Safety-relevant information
• Protect the universal protractor against mechanical damage
