Nerf C17DR00G0, Руководство пользователя и инструкции по установке, Страница: 11 / 44

Time-setting options
en
11
Note:
If you want to be taken directly to the main
menu when you switch on the appliance, you can set
this by altering the "Operating mode on start-up" setting
in the basic settings.
→
"Basic settings", Page 16
7.7 “Fill water tank” message
If you select a heating function and the water tank is
only half full, the appliance will display the message
"Fill water tank".
If the water tank contains sufficient water for cooking,
start the appliance.
If the water tank does not contain sufficient water for
cooking, fill the water tank.
→
"Filling the water tank", Page 9
7.8 Heat-up indicator
When you start a heating function, the heat-up indicator
will appear on the display. The heat-up indicator visual-
ises the rising temperature in the cooking compart-
ment.
Note:
If the Steam heating function has been set, the
heat-up indicator will not be displayed.
7.9 Displaying the current temperature
You can display the current temperature while the ap-
pliance is heating up.
▶
Press ⁠.
7.10 Pausing operation
Requirement:
The appliance is in operation.
▶
Press ⁠.
Note:
If you open the appliance door while the appli-
ance is in operation, the appliance will stop. When you
close the appliance door, the appliance will resume op-
eration.
7.11 Changing settings during operation
1.
To pause operation, press ⁠.
a The fan may continue to run after operation has
been paused or stopped.
2. Use the or button to navigate to the row with
the setting that you want to change.
3. Press or to change the setting.
4.
To resume appliance operation with the new setting,
press ⁠.
7.12 Cancelling operation
Note:
You cannot abort the descaling process.
▶
Press and hold the button until the appliance
stops.
a
The fan may continue to run after operation has
been paused or stopped.
7.13 After using the steam function
When you use the appliance, moisture and food rem-
nants remain in the cooking compartment afterwards.
Dry and clean the appliance after each use. Empty the
water tank.
After using the steam function
1.
Dry the cooking compartment.
→
"Drying the cooking compartment", Page 17
2.
Empty the water tank.
→
"Emptying the water tank", Page 18
8 Time-setting options
Your appliance has different time-setting options, with
which you can control its operation.
8.1 Overview of the time-setting options
You can set a cooking time and an end time on the ap-
pliance. When you set a time on the timer, the timer will
run independently of the appliance and will not inter-
vene in its operation.
Time-setting op-
tion Use
Timer When you set a time on the timer,
the timer will run independently of
the appliance and will not inter-
vene in its operation. It does not
affect the appliance.
Cooking time If you set a cooking time, the ap-
pliance will stop heating automat-
ically once this time has elapsed.
End time Along with the cooking time (dura-
tion), you can set the time at
which you want cooking to end.
The appliance will start up auto-
matically so that it finishes cook-
ing at the required time.
Note:
If you do not apply any settings within a few
seconds, the time-setting options will automatically dis-
appear. If you have already set a cooking time, this will
be applied.
8.2 Setting the timer
You can set the timer regardless of whether the appli-
ance is on or off.
1.
Press ⁠.
2.
Use the button to select the timer duration.
‒
When the appliance is switched on, first use the
button to navigate to "Timer" and then use
the button to select the timer duration.
3.
Press to start the timer.
a
will appear on the display. The timer duration will
then count down.
a
Once the timer duration has elapsed, an audible sig-
nal will sound.
4.
Press the button to silence the audible signal be-
fore it is due to end.
Changing the timer
You can change the timer duration at any time.
1.
Press ⁠.