Nera Saturn Bm Marine Mk2, Техническое руководство

Страница: 5 / 30

2
Saturn Bm Mk2 Marine – Technical Manual
I n t r o d u c t i o n
I n t r o d u c t i o n I n t r o d u c t i o n
BDE
Below Deck Equipment
The
Saturn Bm Main Control Unit (MCU)
can be placed in any suitable location, but is
usually installed in the radio room.
The MCU is designed for wall or desk top
installation.
As all commands of the Saturn Bm terminal
may be carried out from the
Display Handset
,
the MCU can be located out of the way so as
not to occupy valuable working space.
The telephone(s) can be placed anywhere
onboard the vessel.
The following optional peripherals may be
connected to Saturn Bm:
• DTMF telephones (max 5)
• Telefax (for connection to a telephone port)
• Message Indicator
• PC (telex)
• PC (data)
• Serial printer
• GPS navigator
• Plug for NMEA-0183 connection
• Course gyro
• Power 11 - 34 VDC
• Power 110/220 VAC and 24 VDC
(automatic switchover)
Saturn B
ADE
Above Deck Equipment
The Saturn Bm Mk2 Above Deck Equipment (ADE) is protected by a
radome, and it is mounted on a mast to avoid possible obstructions.
Obstructions will cause blind spots, with the result of signal degradation
or even loss of communication with the satellite.
The ADE should also be separated as far as possible from the HF
antenna, and preferably by at least 5 m from the antennas of other
communication or navigation equipment.
Neither must the ADE be placed behind the funnel, as smoke deposits
then evenually will degrade the antenna performance.
Saturn Bm Mk2 Marine – Onboard the Ship
FUN
LP NT R
H FT
EL E
T
T
Ø
4
K
1
A
L S
L ST
3
GH
6
P
9
Y
S
N/ F
DEL
2
5
MN
8
V
Ä
DIAL 00+INTL
TEL NO +
I T
Saturn B
-- 5 of 30 LRC Prüfung