NEPTUNE
SOLAR
PIR PATH LIGHT
USER GUIDE
Do
NOT
charge
behind glass
Do
NOT
place your
solar panel in shaded
areas.
E
W
S
Ensure your solar
panel is South facing
or as near as possible
Clean your solar
panel from time
to time
Thank you for choosing the Neptune Solar PIR Path Light. Please read these instructions carefully
before using your light.
Important notes
Always take care when installing your light. If you are at all unsure, please contact your retailer or a professional trades person for
advice.
Installation
Remove all packaging and put to one side.
Please carefully consider
where you wish to install your light before making alterations to your
property. It’s particularly important that the solar panel receives as much
sunlight as possible. Ensure that it is not obstructed by buildings, fences,
trees, sheds, etc, or the shadows that these create.
If the solar panel is
installed in a poor location, it may not perform to the best of its ability.
Troubleshooting
Please ensure that there are no nearby light sources shining on the solar panel after dark. These could be bright indoor/outdoor
lights from your property or neighbours, or streetlights.
If you are unsure, take the light inside and test it in a dark room.
To maximise the battery capacity, the lights should be charged in direct sunlight for at least 12-24 hours before being used
for the �rst time
The lights will turn ON/OFF automatically when left in the on position. Please note it is completely normal for the lights to
come on at di�erent times as it depends on how fast they charge in their location
. Please note your light will not turn on if it is
daylight, to test your light is working take it into a dark room or use a cloth to cover the solar panel
.
ON/OFF
Assembly
You will locate the on/o� switch on the underside of the light head
Assemble the poles together, choose your desired height and connect to the
stake mount provided. Place your Path Light into soft ground, ensuring suitable
daylight exposure to charge the solar panel.
NEPTUNE
SOLAR
PIR PATH LIGHT
USER GUIDE
Do
NOT
charge
behind glass
Do
NOT
place your
solar panel in shaded
areas.
E
W
S
Ensure your solar
panel is South facing
or as near as possible
Clean your solar
panel from time
to time
Thank you for choosing the Neptune Solar PIR Path Light. Please read these instructions carefully
before using your light.
Important notes
Always take care when installing your light. If you are at all unsure, please contact your retailer or a professional trades person for
advice.
Installation
Remove all packaging and put to one side.
Please carefully consider
where you wish to install your light before making alterations to your
property. It’s particularly important that the solar panel receives as much
sunlight as possible. Ensure that it is not obstructed by buildings, fences,
trees, sheds, etc, or the shadows that these create.
If the solar panel is
installed in a poor location, it may not perform to the best of its ability.
Troubleshooting
Please ensure that there are no nearby light sources shining on the solar panel after dark. These could be bright indoor/outdoor
lights from your property or neighbours, or streetlights.
If you are unsure, take the light inside and test it in a dark room.
To maximise the battery capacity, the lights should be charged in direct sunlight for at least 12-24 hours before being used
for the �rst time
The lights will turn ON/OFF automatically when left in the on position. Please note it is completely normal for the lights to
come on at di�erent times as it depends on how fast they charge in their location
. Please note your light will not turn on if it is
daylight, to test your light is working take it into a dark room or use a cloth to cover the solar panel
.
ON/OFF
Assembly
You will locate the on/o� switch on the underside of the light head
Assemble the poles together, choose your desired height and connect to the
stake mount provided. Place your Path Light into soft ground, ensuring suitable
daylight exposure to charge the solar panel.
