Neptune MRX920, Руководство по началу работы

Страница: 33 / 68

Getting Started
MRX920 Getting Started Guide 3-9
5 Click Settings on the MX900 main window. (See Figure 3.31 on
page 3-28.)
6 Click Receiver Settings .
7 Click Scan for Devices .
Scan for Devices
To scan for devices, complete the following steps.
1 In Windows, open Device Manager and locate the RNDIS network
device.
2 Right-click RNDIS/Ethernet Gadget and select U pdate Driver
Software .
3 Select Browse my computer for driver software and then Let me
pick from a list of device drivers on my computer .
4 Choose Network adapters as the device type and click Next .
A drop down list of manufacturers and network adapters appears.
5 Select Microsoft Corporation and Remote NDIS Compatible
Device .
6 Click Next , and then scroll through the Update Driver Warning
Dialog .
7 In MX900, select the Settings tab and then select Scan For
Devices .
If the USB driver does not auto install, complete the instructions which follow,
describing how to configure the MRX 920 for use with MX900.