Neptune Technology TRICON SmartTrol, Руководство по установке и обслуживанию

Страница: 49 / 90

Press Display
ENT DUR A ## (Duration of Relay A if Comparison mode is Total or Grand Total).
CLR Type new OutPut Duration from the worksheet for Relay A, or if Comparison mode for
Relay A is Rate.
ENT B #####v (Current Relay B Comparison mode).
ENT DUR B ## (Duration of Relay B if Comparison mode is Total or Grand Total).
CLR Type new Output Duration from the worksheet for Relay A, or if Comparison mode for
Relay B is Rate.
ENT SmartTrol returns to normal operating mode.
Table 13 – Setting Up the Relay Operation (continued)
Setting Up Preset A
This section provides information on setting up Preset A.
Press Display
A PRESET A (Displays 1 second).
######## (Current value blinks).
CLR Type new Preset A value from the worksheet.
ENT SmartTrol returns to normal operating mode.
Table 14 – Setting Up Preset A
Setting Up Preset B
This section provides information on setting up Preset B.
Press Display
B PRESET B (Displays 1 second).
######## (Current value blinks).
CLR Type new Preset B value from worksheet.
ENT SmartTrol returns to normal operating mode.
Table 15 – Setting Up Preset B
TRICON
®
SmartTrol
™
Installation and Maintenance Guide
37
Chapter 10: Setting Up the SmartTrol™