Neptune Technology TRICON SmartTrol, Руководство по установке и обслуживанию

Страница: 18 / 90

Press the key indicated in the table to return to the Total.
Press Display Description
ENT ######## Current value of Total.
Table 3 – Return to Total
Display Rate
When Rate is displayed, the first character position on the display is “R”. Rate represents
the volume of liquid passing through the meter in a unit of time (for example: gallons per
minute).
Press the key indicated in the table to display the Rate.
Press Display Description
C (Rate / Total) R ###### Current value of Rate.
Table 4 – Display Rate
Press the key indicated in the table to return to the Total.
Press Display Description
C (Rate / Total) ######## Current value of Total.
Table 5 – Return to Total
Setup the SmartTrol™
Before using the SmartTrol, you must program several setup values from the Setup Menu.
Fill out the Worksheet on Page 23 using the instructions beginning on Page 25.
Instructions for setting up the SmartTrol begin on Page 33. To enter the Menu from the
normal operating mode, press the “D” (MENU) key.
6 TRICON
®
SmartTrol™ Installation and Maintenance Guide
Chapter 3: Operating the SmartTrol™