Neptune Technology R450, Руководство по установке и обслуживанию

Страница: 94 / 144

PC Notebook Configuration
In order to use a notebook computer, consider the following.
l
The CalAmp modem requires an Ethernet cable to connect to the
network port of the computer. It does not require the laptop to have
a serial port.
l
The CalAmp modem uses an online application for configuration. It
does not require software to be installed to configure the modem.
l
The Wi-Fi Modem configuration software is used if you are using a
Wi-Fi modem.
Additional Equipment Required for the Computer
In addition to the previously stated required items, the following are
also required.
l
An Ethernet cable to go between the computer and the GPRS
modem.
l
Neptune recommends that a CalAmp LandCell or similar product
be installed on the computer so that it can received emails
generated by the system during testing. Otherwise, a Blackberry or
an equivalent cell phone that can receive configuration packet
emails is required.
WARNING: Neptune does not recommend servicing an
R450 DC during inclement weather.
AVERTISSEMENT: Neptune ne recommande pas l’entretien
d’un enregistreur de données R450 en cas de mauvais
temps.
Potential R450 DC Problems
The following sections describe problems that can arise and how to
handle these potential problems.
Multiple R450 DCs Not Syncing with Host Database
Consider the following.
l
Host database server is down or not connected to the Internet.
l
Remote Internet, phone, cable, or cell service provider is either
down or experiencing degraded service.
l
Multiple power outages affecting several sites.
74 R450 Data Collector Installation and Maintenance Guide
Chapter 6: Troubleshooting