Neptune Technology R450, Руководство по установке и обслуживанию

Страница: 128 / 144

On this tab, remember the following:
l
All fields with an * are required.
l
All white fields are available fields.
l
All fields with gray test are read-only fields.
4. Complete all the required and available information that applies,
and click
Save
.
The R450 DC just created appears in the list of R450 DCs on the
Collector tab, and the detail appears in the lower half of the page.
Editing Collector Information
To edit information for an R450 DC, complete the following steps.
1. On the Collector tab, select the R450 DC for which you want to
edit the information.
The Edit Collector window appears with the existing information
for the collector.
2. Edit and change the appropriate information on both the
Collector
Details tab and the Collector Network Settings tab.
3. When complete, click Save to display the new information for the
collector.
The changes you made are saved for the selected collector.
Deleting a Collector
To delete a collector, complete the following steps.
1. On the Collector tab, select the collector you want to delete.
2. Click Delete .
A delete confirmation message appears similar to the following.
Figure 80 – Delete Confirmation Dialog Box
3. Click OK .
The R450 DC is now deleted from the list of collectors on the
Collector
tab.
108 R450 Data Collector Installation and Maintenance Guide
Appendix B: Flash Drive Configuration for R450 DC