Room Control Switch
Specification and Installation Instructions
IMC10-201116
www.neptronic.com
Page | 2
Mounting Instructions
CAUTION: Remove power to avoid a risk of malfunction.
A.
Remove the captive screw that’s holding the base and the front cover of the room setpoint sensor enclosure.
B. Lift the front cover of the enclosure to separate it from the base.
C. Pull wire through the hole in the base.
D. Secure the base to the wall using wall anchors and screws (supplied). Make the appropriate connections.
E. Mount the control module on the base and secure using the screw.
Recycling at end of life: please return this product to your Neptronic local distributor for recycling. If you need to find the nearest
Neptronic authorized distributor, please consult
www.neptronic.com
.
A
B
E
D
C