Neoway N75 EVK, Руководство пользователя

Страница: 8 / 14

N75 EVK User Guide
About This Document
Copyright © Neoway Technology Co., Ltd 3
Table 2-1
Interfaces and button of N75 EVB
No. Interface/Button Description
1 N75 4G module
2 PWRKEY button
After supplying power to the module, hold this button for more
than 1 second to start the module
3 USB_BOOT button Force the module to enter download mode
4 RESET_N button Hold this button for more than 1 second to reset the module
5 High-level start pin To start the module by a high level
6 USB port To download firmware or send AT command
7 SIM connector Micro-SIM card
8 5V DC power port Main power supply, ranging from 3.6V to 4.5V
9 Power control switch To control the power supply
10 3.8V LDO regulator Level shift
11 3.3V LDO regulator Level shift
12 Indicators Power, ring, network
13 UART2
Used to commission the module
CANNOT be used to supply power
14 UART3 Not supported
15 Antenna interfaces
Diversity antenna connector, GPS antenna connector, 2G/3G/4G
antenna connector