NeOvo EF 22, Руководство пользователя

Страница: 33 / 40

10 Troubleshooting
10.1 Error messages B-Control
10.1.1 Error code display
If an error is detected, the error code is displayed automatically.
Note
The
and icons flash.
10.1.2 Fault code display
If a fault is detected, the fault code is displayed automatically.
10.2 Error messages IniControl 2
10.2.1 Error messages
Resetting the control panel allows the appliance to be restarted.
The message
appears when a fault code is detected. After resolving
the problem, pressing the key resets the appliance's functions and
thus eradicates the fault.
If several faults occur, they are displayed one after the other.
1. Reset the control panel by pressing the key for 3 seconds,
when an error message is displayed.
In economy mode, the appliance will not run a domestic hot water
heating cycle after a central heating cycle.
2. Display the current operating status by briefly pressing the key.
10.2.2 Error history
1. Access the menu level by pressing the two keys on the right simulta­
neously.
2. Select the Failure menu by pressing the key.
Fig.48 Error code display
MW
-3
0
0
0
2
4
0
-2
Fig.49 Fault code display
MW
-6
0
0
0
2
1
0
-3
Fig.50
MW
-5
0
0
0
0
6
1
-3
Fig.51
MW-5000060-3
Fig.52
MW-2000369-1
Fig.53
MW
-5
0
0
0
0
1
1
-3
10 Troubleshooting
7626252 - v02 - 17102016 EF 33