background image

Legal Information 

 

Legal Information 

All Neousys Technology Inc. products shall be subject to the latest Standard 

Warranty Policy

 

Neousys Technology Inc. may modify, update or upgrade the software, firmware or 

any  accompanying user documentation without any prior notice. Neousys 

Technology Inc. will provide access to these new software, firmware or 

documentation releases from download sections of our website or through our 

service partners.

 

Before installing any software, applications or components provided by a third party, 

customer should ensure that they are compatible and interoperable with Neousys 

Technology Inc. product by checking in advance with Neousys Technology Inc.. 

Customer is solely responsible for ensuring the compatibility and interoperability of 

the third party’s products. Customer is further solely responsible for ensuring its 

systems, software, and data are adequately backed up as a precaution against 

possible failures, alternation, or loss. 

For questions in regards to hardware/ software compatibility, customers should 

contact Neousys Technology Inc. sales representative or technical support. 

To the extent permitted by applicable laws, Neousys Technology Inc. shall NOT be 

responsible for any interoperability or compatibility issues that may arise when (1) 

products, software, or options not certified and supported; (2) configurations not 

certified and supported are used; (3) parts intended for one system is installed in 

another system of different make or model. 

Содержание POC-500 Series

















































































































Отзывы: