Neousys Technology POC-551VTC Series, Руководство пользователя

Страница: 75 / 113

POC-551VTC
75
3.8.5 Operation Modes of Ignition Power Control
Y You can use the rotary switch to configure the operation mode. The system offers
16 (0~15) operation modes with different power-on/power-off delay configurations.
The rotary switch can be located on the MezIO
TM
board and to access it, please refer
to the section “ Disassembling the System Enclosure ”.
Ignition rotary switch location on MezIO
TM
board Ignition rotary switch
The ignition control module is also BIOS-configurable. When rotary switch is set to
mode 15 (0xF), the ignition power control is set to executed according to parameters
configured in BIOS setup menu, which allows richer combination of power-on/
power-off delay and more detailed control parameters.

Mode 0
Mode 0 is the ATX mode without power-on and power-off delay. User can only
use the power button on the front panel to turn on or turn off the system.
Mode Power-on Delay Power-off Delay Hard-off Timeout
0 N/A N/A N/A

Mode 1
Mode 1 is AT mode without power-on and power-off delay. The system
automatically turns on when DC power is applied. A retry mechanism is
designed to repeat the power-on cycle if the system fails to boot up.
Mode Power-on Delay Power-off Delay Hard-off Timeout
1 N/A N/A N/A