PCIe-PoE550X
32
Appendix A Using Per-Port PoE
On/ Off Control
PCIe-PoE550X supports power on/off control for each of its PoE ports. With provided
function APIs, users can turn on or turn off the power of each PoE port manually for
fault-recovery or device power reset purpose. To use the function, you need to install
the WDT_DIO_Setup.exe driver package.
NOTE
Please install WDT_DIO_Setup_v2.2.9 or later versions.
Driver Installation
The per-port PoE on/off control function library is delivered as a part of Neousys driver
setup package (WDT_DIO_Setup). Please use
WDT_DIO_Setup_64_ v2.2.9.exe
or
later versions.
1.
Execute
WDT_DIO_Setup_v2.2.9.exe
. The following dialog appears.
